Total : 0
Water-based Adhesive
6608 series
- Name: Water-based PU adhesive
- Appearance: Milky White, viscous liquid
- Main component: Polyurethane dispersion
- Viscosity (CPS)(25˚C): 4,000~19,000
- Solid Content (%): 50 ± 2
- Application: For bonding to EVA, leathers, nylon, phylon, PU, PVC, rubbers, and etc.
- Characteristics: Meeting environmental protection requirement, possessing high solid content and good initial bonding strength, and suitable for spray application.
6602 series
- Name: Water-based PU adhesive
- Appearance: Milky White, viscous liquid
- Main component: Polyurethane dispersion
- Viscosity (CPS)(25˚C): 4,000~6,000
- Solid Content (%): 50 ± 2
- Application: For bonding to EVA, leathers, nylon, phylon, PU, PVC, rubbers, and etc.
- Characteristics: Meeting environmental protection requirement, possessing high solid content and good initial bonding strength, and suitable for spray application.
NWA01 series
- Name: Water-based PU adhesive
- Appearance: Milky White, viscous liquid
- Main component: Polyurethane dispersion
- Viscosity (CPS)(25˚C): 4,000~14,000
- Solid Content (%): 50 ± 2
- Application: NWA01 is a water-based PU adhesive for assembling of rubber, PU foam, EVA, leather, synthetic leather and fabric, etc.
- Characteristics:
- None organic solvent.
- None yellowing.
- Water based adhesive with good early bonding strength.
GE01 series
- Name: One component waterbased PU adhesive
- Appearance: Milky White, viscous liquid
- Main component: Polyurethane dispersion
- Viscosity (CPS)(25˚C): 5,000~15,000
- Solid Content (%): 50 ± 2
- Application: GE-01 is a water-based PU adhesive for assembling of rubber, PU foam, EVA, leather, synthetic leather and fabric, etc.
- Characteristics:
- No Pot life
- No Failure of Hardener Mixing
- Pressurized Feed Tank and Spray Machine is applicable.
6371 series
- Name: Water-based PU Adhesives
- Appearance: Milky white liquid
- Main component: Polyurethane
- Viscosity (CPS)(25˚C): 5,000~25,000
- Solid Content (%): 45-55
- Application: Water-based PU Cement. Applicable in ink mainly. For further information, please contact us.
- Characteristics:
- good initial anti-tension
- Non-yellowing
6127T series
- Name: Water-based Vulcanized adhesive
- Appearance: Milky white, viscous liquid
- Main component: Rubber
- Viscosity (CPS)(25˚C): 2,000~7,000
- Solid Content (%): 24-27
- Application: Suitable for canvas, leather, synthetic leather materials, and upper, outsole, foxing tape of vulcanized shoes.
- Characteristics:
- Good yellowing resistance and bonding strength.
- Long tack time.
- Low irritating odor.
6326K series
- Name: Water-based chloroprene rubber adhesive
- Appearance: Milky white ~ pale yellow emulsion
- Main component: Compound Latex
- Viscosity (CPS)(25˚C): 8,000~30,000
- Solid Content (%): 55-60
- Application: For toe lasting and folding
- Characteristics:
- High bonding strength.
- Nontoxicity.
- Diverse materials are applicable.
- The thermal stability is good.
6326H series
- Name: Water-based chloroprene rubber adhesive
- Appearance: Milky white ~ pale yellow emulsion
- Main component: Compound Latex
- Viscosity (CPS)(25˚C): 18,000~35,000
- Solid Content (%): 55-60
- Application: For toe lasting, UPPER and attaching uppers to counter.
- Characteristics: Good bonding strength, wide material applicability, and heat resistance.
6326L series
- Name: Water-based chloroprene rubber adhesive
- Appearance: Milky white ~ pale yellow emulsion
- Main component: Compound Latex
- Viscosity (CPS)(25˚C): <300
- Solid Content (%): 55-60
- Application: For TPR materials and counter dipping.
- Characteristics: Toluene free and good bonding strength